Accessories for MULTIVAP Evaporators

Needles See N-EVAP accessories on page 11.

Pasteur Pipet Adapters See N-EVAP accessories on page 11.

Test Tube Racks Stainless steel racks will accept one size test tube in the range 10mm to 30mm. When ordering, specify the test tube diameter and length in millimeters, the shape of the tube end (round, conical, flat) and the material (glass or plastic). This information will determine the correct rack size. For MULTIVAP for 49position................................... Catalog No. NA1310 For MULTIVAP for 64 position.................................. Catalog No. NA1316 For MULTIVAP for 100 position................................ Catalog No. NA1410

Manifold and Rack 16 Positions Used when solutions in 150ml beakers, 75 mi Erlenmeyer flasks or 125 flat bottom flasks need to be concentrated. They install on the standard MULTIVAP 113 stand and bath. Manifold 16 position MULTIVAP 113........................... Catalog No. NA0117 Rack 16 position MULTIVAP 113................................ Catalog No. NA1311

Cover Plate for MULTIVAP Bath Stainless steel cover slides under stand frame and rests on bath rim. Allows bath to be remain on in stand by mode when no sample rack is installed. Maintains bath temperature and prevents bath going to dryness. Bath cover plate MULTIVAP 113................................... Catalog No. NA1326 Bath cover plate MULTIVAP 114................................... Catalog No. NA1426

Gas Flow Meter Current MULTIVAPs are equipped standard with these devices. They can be added to older units and include a bracket for mounting on the side of the bath. The meter with valve serves as the main gas control for the instrument. The scale is in liters per minute. Meter 0 to 05 Ipm for N-EVAP 111, 140........................ Catalog No. NA1124 Meter 0 to 10 Ipm ior N-EVAP 112................................ Catalog No. NA1221 Meter 0 to 20 Ipm for N-EVAP 113, 115, 116................ Catalog No. NA1521 Meter 0 to 30 Ipm ior N-EVAP 114................................ Catalog No. NA1421

Rota-Tables Circular epoxy coated aluminum platform rotates on a bearing. Installs under N-EVAP or MULTIVAP baths for rotating entire unit. Also useful for general laboratory applications where equipment must be rotated for easier access to all sides. Three sizes available. Will support up to 100 pounds. Rota-Table 8.5 inch diameter........................................... Catalog No. NA1115 Rota-Table 12 inch diameter............................................ Catalog No. NA1215 Rota-Table 18 inch diameter ............................................Catalog No. NA1515

Heating Devices OA-SYS All of the baths manufactured by Organomation can be purchased by themselves. Models are available that will heat water, synthetic liquid, oil or dry media. These laboratory and industrial grade baths ieature rugged stainless-steel construction, heavy duty heaters, thermostat control and high temperature insulation. Overheat protection devices are built in. Options include digital controls, intrinsically safe purged case, acid-resistant coating. GFCI type electrical plug and 240 volt wiring. Stand rods and clamps to hold glassware can be attached. A wide range of sizes is available. Standard diameters for round baths are 8.5 inch, 12 inch, 16 inch and 18 inch. Depths are 4.5 inch, 8.5 inch and 12.5 inch. Cover disks for specific sized flasks can be made to order. For complete description and specifications that show sizes, features and availability of our laboratory heating units, please request Bulletin B.